Haier PRFS25 installing your refrigerator, Unpacking Your Refrigerator, Proper Air Circulation

English

installing your refrigerator

Note: Refrigerator is not for built-in purposes. Freestanding only.

Unpacking Your Refrigerator

1.Remove all packaging material. This includes the foam base and all adhesive. tape holding the refrigerator accessories inside an outside. Slide out and remove plastic or foam guard used to secure the compressor from shipping damage due to vibration and shock.

2.Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator.

Proper Air Circulation

•To ensure that your refrigerator works at the maximum efficiency it was designed for, you should install it in a location where there is proper air. circulation, plumbing and electrical connections.

•The following are recommended clearances around the. refrigerator:

Sides……………3/4 "(19mm). Top....................1" (25mm). Back..................1" (25mm)

Electrical Requirements

•Make sure there is a suitable power outlet (115 volts, 15 amps outlet) with proper grounding to power the refrigerator.

•Avoid the use of three-plug adapters or cutting off the third grounding in order to accommodate a two-plug outlet. This is a dangerous practice since it. provides no effective grounding for the refrigerator and may result in.

shock hazard.

4