English
4.Thread a U.L. approved 30 Amp power cord. NEMA
5.Attach the green power cord ground wire to the cabinet with green ground screw.
6.Attach the white (neutral) power cord conductors to the outer cord and the green ground wire from the dryer harness to the
7.Attach the red and black power cord conductors to the outer
Warning: Do not make a sharp bend or crimp wiring /conductor at connections.
8.Tighten the screws securing the cord restraint firmly against the power cord.
9.Tighten the strain relief nut securely so that the strain relief does not turn.
10.Reinstall the terminal block cover.
Caution: Label all wires prior to disconnection, when servicing controls. Wiring errors can cause improper operation and be dangerous. Check unit for proper operation after servicing.
Warning: Discard or destroy the carton and plastic bags after the dryer is unpacked. Children should not be allowed to use them to play with. Cartons covered with rugs, bedspreads, or plastic sheets can become an airtight chamber and cause suffocation leading to death. Make all packing materials inaccessible to children.
Warning: The instructions in this manual and all other literature included with this dryer can not cover every possible condition and situation that may occur. Good safety practice and caution must be applied when installing, operating and maintaining any appliances. After installing, if you are in doubt, call a certified electrician to install and wire the dryer.
12
