Haier CRDE400AW, CRDE200AW user manual Timed Dry cycle

English

Timed Dry cycle

Time Remaining

Dry	Very				More Time			Power
								On/Off
Cool down	More
		High			Less Time			On
Cycle completed	Normal		Customized				Louder	Start
Extend tumble	Less	Medium				Auto Dry	Softer	Off
			Normal		Bulky Items			Pause
	DAMP	Low				Timed Dry	Off	Wrinkle
		Air Only(No Heat)				Rack dry
Sensor			Heavy		Permanent Press		Cycle	Care
Dryness		Temp		Cycles		Timed	Signal
Level
						Cycles
			Cotton		Delicate

4 3 2 5 6 7 1

1.Press "Power On/Off" button to power on

2.Press "Timed/Cycles" button and select "Timed Dry" cycle

After powering on, press "Timed/Cycle" button to select "Timed Dry" program.

3. Press "More Time" And "Less Time" buttons to set a suitable time

After setting "Timed/Cycle" to "Timed Dry" , you can press these two buttons to

increase or decrease drying time as you desires.

4-6. Press buttons "Temp", "Cycle Signal"and "Wrinkle Care" to define your desired program

Notes: For "Timed Dry" program, use of buttons "Temp", "Cycle Signal", "Delay Start" and "Wrinkle Care" is the same as for auto-programs. "Sensor Dryness Level" is here inactive, pressing of which will get alarms.

7. Press "Start/Pause" button

Rack Dry cycle

Time Remaining

Dry	Very				More Time			Power
								On/Off
Cool down	More
		High			Less Time			On
Cycle completed	Normal		Customized				Louder	Start
Extend tumble	Less	Medium				Auto Dry	Softer	Off
			Normal		Bulky Items			Pause
	DAMP	Low				Timed Dry	Off	Wrinkle
		Air Only(No Heat)				Rack dry
Sensor			Heavy		Permanent Press		Cycle	Care
Dryness		Temp		Cycles		Timed	Signal
Level
						Cycles
			Cotton		Delicate

4 3 2 5 6 7 1

20