840131900 ENv01.qxd 2/22/05 10:40 AM Page 3
Do not place blender jar in the freezer filled with food or liquid. This will freeze and can result in damage to the cutting blades, jar, blender and possibly result in personal injury.
NOTICE: To prevent leakage of liquids from your blender jar, the round rubber gasket must be properly placed between jar and cutting assembly as shown in the diagram below.
Parts and Features
1.Filler Cap
2.Lid
3.Blender Jar
4.Thermal Jar
(for Thermal Jar models only)
5.Gasket
6.Dispenser
(also see inset below)
7.Base
8.Dispenser Lever
9.Speed Control Panel
10.Cutting Assembly
11.Dispenser Cover
12.Spout
13.Actuator
14.Interior Plug
15.Spout Cap
Thermal Jar
Models Only
Before First Use: After unpacking blender, wash everything except blender base in hot, soapy water. Dry thoroughly. Wipe blender base with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when han- |
|
dling the cutting assembly as the | 3 |
blades are very sharp. |
