840154800 Ev03.qxd 10/30/06 9:10 AM Page 5
To Vertical Steam
1.Follow Steps 1 through 3 in “To Steam Iron.”
2.With iron in an upright position, turn Temperature Control Dial to HIGH and allow 2 minutes for iron to reach desired temperature.
3.Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror.
4.Hold iron about 6 inches away from garment and press and
release the Blast Button to steam out wrinkles.
Wait at least 3 seconds before pressing Blast Button again.
5.To turn iron off, set Adjustable Steam to 
(Dry Iron). Turn the Temperature Control Dial to Off. Unplug iron.
6.Empty water from the iron following directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to touch delicate garments.
Fabric Setting Chart
Steam Setting
Steam Range Dry Iron
Temperature Setting | Ironing Instructions | |
|
|
|
Off |
|
|
Nylon, | Low • | Dry iron using spray if necessary. |
Acrylic |
|
|
|
|
|
Silk | Low • | Dry iron on the inside of the garment. |
|
|
|
Wool | Medium •• | Use a press cloth and steam iron on the |
|
| inside of garment. |
|
|
|
Polyester | Medium •• | Iron while fabric is still damp. |
Rayon | High ••• | Iron using spray if necessary. |
|
|
|
Cotton, | High ••• | For cotton, iron while still damp or use |
Linen |
| spray. For linen, iron fabric on the inside |
|
| of the garment. Use this setting for |
|
| vertical steaming. |
|
|
|
5
