INSTALLATION

COMBUSTIBLE WALL CHIMNEY

CONNECTOR PASS-THROUGHS

Method A: 12" (304.8 mm) Clearance to Combustible Wall Member:

Using a minimum thickness 3.5" (89 mm) brick and a 5/8" (15.9 mm) minimum wall thickness clay liner, construct a wall pass-through. The clay liner must conform to ASTM C315 (Standard Specifi cation for Clay Fire Linings) or its equivalent. Keep a minimum of 12" (304.8

mm)of brick masonry between the clay liner and wall combustibles. The clay liner shall run from the brick masonry outer surface to the inner surface of the chimney fl ue liner but not past the inner surface. Firmly grout or cement the clay liner in place to the chimney fl ue liner.

Method B: 9" (228.6 mm) Clearance to Combustible Wall Member:

Using a 6" (152.4 mm) inside diameter, listed, factory-built Solid-Pak chimney section with insulation of 1" (25.4 mm) or more, build a wall pass-through with a minimum 9" (228.6 mm) air space between the outer wall of the chimney length and wall combustibles. Use sheet metal supports fastened securely to wall surfaces on all sides, to maintain the 9" (228.6 mm) air space. When fastening supports to chimney length, do not penetrate the chimney liner (the inside wall of the Solid-Pak chimney). The inner end of the Solid-Pak chimney section shall be fl ush with the inside of the masonry chimney fl ue, and sealed with a non-water soluble refractory cement. Use this cement to also seal to the brick masonry penetration.

Method C: 6" (152.4 mm) Clearance to Combustible Wall Member:

Starting with a minimum 24 gage (.024" [.61 mm]) 6" (152.4 mm) metal chimney connector, and a minimum 24 gage ventilated wall thimble which has two air channels of 1" (25.4 mm) each, construct a wall pass-through. There shall be a minimum 6" (152.4 mm) separation area containing fi berglass insulation, from the outer surface of the wall thimble to wall combustibles. Support the wall thimble, and cover its opening with a 24-gage minimum sheet metal support. Maintain the 6" (152.4 mm) space. There should also be a support sized to

fit and hold the metal chimney connector. See that the supports are fastened securely to wall surfaces on all sides. Make sure fasteners used to secure the metal chimney connector do not penetrate chimney fl ue liner.

Method D: 2" (50.8 mm) Clearance to Combustible Wall Member:

Start with a solid-pak listed factory built chimney section at least 12" (304 mm) long, with insulation of 1" (25.4 mm) or more, and an inside diameter of 8" (2 inches [51 mm] larger than the 6" [152.4 mm] chimney connector). Use this as a pass-through for a minimum 24-gage single wall steel chimney connector. Keep solid-pak section concentric with and spaced 1" (25.4 mm) off the chimney connector by way of sheet metal support plates at both ends of chimney section. Cover opening with and support chimney section on both sides with 24 gage minimum sheet metal supports. See that the supports are fastened securely to wall surfaces on all sides. Make sure fasteners used to secure chimney fl ue liner.

Hampton H200 Cast Freestanding Woodstove

13

Page 12 Page 14
Page 13
Image 13
Hampton Direct H200 installation manual Combustible Wall Chimney Connector PASS-THROUGHS
Page 12 Page 14

H200 specifications

The Hampton Direct H200 is an innovative solution for consumers seeking convenience and efficiency in their daily tasks. This versatile device stands out in the market due to its combination of smart technology and user-friendly features, making it an essential addition to any household.

One of the key features of the H200 is its sleek and modern design, which ensures that it fits seamlessly into any home environment. Its compact size allows for easy storage and portability, making it accessible for various needs, whether at home or on the go.

The H200 boasts advanced functionality powered by cutting-edge technology. One notable aspect is its intuitive control panel, which incorporates touch-screen functionality for effortless navigation. Users can easily select different modes and settings tailored to their specific requirements, enhancing usability and flexibility.

In terms of performance, the H200 utilizes energy-efficient technology that not only reduces power consumption but also promotes sustainability. This is a significant advantage for environmentally-conscious users looking to minimize their carbon footprint while still enjoying modern conveniences.

The device is equipped with multiple settings that cater to different tasks. Whether it’s cooking, cleaning, or organizing, the H200 adapts to various functions with ease. Its powerful motor ensures efficient operation, allowing users to complete tasks quickly and effectively, saving time and effort in the process.

Additionally, the Hampton Direct H200 emphasizes safety with features such as automatic shut-off and thermal protection, ensuring that users can work confidently without the fear of overheating or accidents.

The ease of maintenance and cleaning further enhances its value. With removable parts that are dishwasher-safe, the H200 offers a hassle-free experience for users, promoting a clean and hygienic environment.

In summary, the Hampton Direct H200 represents a perfect blend of style, performance, and safety. With its array of advanced features and technologies, it stands out as a reliable tool for simplifying daily tasks. Whether used for cooking, organizing, or cleaning, the H200 is designed to meet the demands of modern living, making it a valuable investment for any household looking to enhance productivity and efficiency.
Top Page Image Contents