Nixdorf OCIA Interface

Nixdorf OCIA Interface

The Nixdorf OCIA bar code also programs the following prefixes for each symbology:

Symbology

Prefix

EAN/UPC with Addenda

44

4B

Code 39

44

49

Interleaved 2 of 5

44

48

2 of 5

44

47

Code 128

44

4A

Serial Wedge

The IT3800/3900 uses true and TTL signal levels to wedge into an RS-232 serial network. Use IT3800/3900 serial wedge cables only to prevent damage to the scanner. Refer to the serial interface programming (pages 2-8to 2-12) to set the baud rate and communications protocol.

To set up the serial wedge terminal ID, find the terminal ID in the Supported Terminal Chart and follow the instructions on page 2-2. Set the port to which you want the scanned data to transmit. Port 1 corresponds to P1 on the output cable and Port 2 corresponds to P2 on the output cable. Choosing Both sends scanned data to P1 and P2. Default = P1.

*P1

P2

Both P1 and P2

IT3800/3900 User’s Guide

1 - 13

Page 25
Image 25
Hand Held Products IT3800, IT3900 manual Nixdorf Ocia Interface, Serial Wedge