Hand Held Products IT3800, IT3900 manual Standard, Cable Pinouts, Laser, Compatible, Bar Image

IT3800/3900

Conventional laser data format is provided at the modular connector in the scanner handle. The interface cable is terminated with a 10 pin modular plug, and a 9 pin Type D (squeeze to release) connector that is compatible with all Hand Held Products terminals.

Laser Standard

User’s Guide

10 Pin Modular Plug

onnects to the scanner handle

1Turn on good read or LED beeper

2Trigger signal to decoder

3Laser enable

4Supply ground

5

6Digital bar code data output

7Power connection (Refer to table on page 13-1)

9Start of scan

Output Only (Laser	Cable Pinouts
Compatible

Start of scan 1

Digital bar code data output 2 Turn on good read LED or beeper 3 ◆ N/C 4

Trigger signal to decoder 5

6Laser enable

7Supply ground

8Cord shield

9 5 Volt power connection ◆

Bar Image)

13 - 3

9 Pin Type D Female	◆ Pins 4 and 9 are populated depending on power supply voltage option.
connects to your terminal
	Some decoders may have +12V on pins 4 or 9.	Connect to +5VDC ONLY!