Good Read Delay
This sets the minimum amount of time before the scanner can read another bar code. Default = No Delay.
*No Delay
Short Delay
Medium Delay
Long Delay
Trigger Mode
Manual/Serial Trigger: You can activate the scanner either by pressing the trigger, or using a serial trigger command (see "Trigger Commands" on page 12- 4). When in manual trigger mode, the scanner scans until a bar code is read, or until the trigger is released.
When in serial mode, the scanner scans until a bar code has been read or until the deactivate command is sent. In serial mode, the scanner can also be set to turn itself off after a specified time has elapsed (see Serial Trigger Time Out, which follows). Default for IT3800.
Manual/Serial Trigger
3 - 4 | IT3800/3900 User’s Guide |
