SATO CL412E service manual Cancel print job Yes no, LCD Panel- Normal Mode, Cancel Print Job

Section 2. Configuration

LCD Panel— Normal Mode

Cancel Print Job

If the printer has a print job(s) loaded in memory selecting YES will cause the job(s) to be cleared. The default selection is NO. Make sure that you want to cancel the print job before selecting YES as the job cannot be recovered and will have to be retransmitted to the printer.

To cancel the print, perform the following steps:

cancel print job

yes no

STEP PROCEDURE

1.Use the LINE key to step the underlined cursor to either No or Yes.

2.Once the correct setting is underlined, press the FEED key to accept the setting.

3.After the print job(s) have been cleared from memory the printer will display a COMPLETED message for 3 seconds and then return to the initial ONLINE Normal Mode.

cancel print job

COMPLETED

If you wish to change any of the settings, you must enter the User mode again by taking the printer OFFLINE and simultaneously pressing FEED and LINE keys.

Page 2-12 SATO CL408e/CL412e Service Manual

PN 9001078 Rev. B