SATO CL412E service manual Counter all clear completed All clear mode, Clear Eeprom

Section 7. Factory Resets

7.6 Clear EEPROM

To clear the EEPROM, perform the following steps.

Caution: Resetting the printer will clear all registers.

STEP PROCEDURE

1.Record all current dip switch positions, then place all switches in the OFF position.

2.Place the DSW2-4 in the ON or up postion.

3.Press the LINE and FEED key while simultaneously turning ON the power switch. When the printer beeps, release the keys. The following screens will appear.

initializing

rom v00.00.00.00

maintenance mode dipsw2-4 on->off

4.Place the DSW-4 in the OFF postion and the following screen will appear.

factory mode

5.Press the LINE key to display the next screen.

all clear mode

6.Press the FEED key to display the next screen.

all clear

counter eeprom

7.Press the FEED key to display the next screen.

counter all clear

yes no

8.Press the LINE key to select YES or NO. If YES is selected press the FEED key to clear the EEPROM .

counter all clear completed

all clear mode

9.Power OFF the printer and confirm that all switches are in the OFF or down position.

Page 7-6 SATO CL408e/CL412e Service Manual

PN 9001078 Rev. B