SATO CL412E service manual Installation Considerations, Optional Accessories, Accessory

Section 1. Overview and Specifications

1.6 Installation Considerations

Printer operation can be affected by the printer environment. The location of the printer should be free from dust, humidity and sudden vibrations. To obtain optimum results from the printer, avoid locations influenced by:

•Direct or bright sunlight, since bright light will make the label sensor less responsive and may cause the label to be sensed incorrectly.

•Warm temperatures which can cause electrical problems within the printer. (See Section 1-8 Environment.

1.7 Optional Accessories

ACCESSORY	CL408/CL412
	One slot for PCMCIA Memory Cards (up to 16 MB Flash or 4
Memory Expansion	MB SRAM) and/or 4 MB internal Flash ROM. Can be used for
	graphic file storage, print buffer expansion, format storage and
	downloaded True Type fonts.*
Calendar	An internally mounted Date/Time chip that can be used to
	date/time stamp labels at the time of printing. *
Label Cutter	An internally mounted attachment allowing labels to be cut at
	specified internals. Controlled through programming. *
Label Dispenser	Internal attachment allowing labels to peeled from backing for
	immediate (on demand) application. Internal backing take-up.
Label Rewinder	External option that rewinds labels onto a roll after they are
	printed.
Parallel Interface	IEEE1284 Parallel Interface Module
Serial Interface	High Speed Serial RS232 Interface Module
Universal Serial I/F	USB Interface Module
Ethernet Interface	10/100BaseT Interface Module
	Coax/Triax Interface Module. Coax I/F emulates an IBM 3287-2
Coax/Twinax Interface	printer with a standard Type A BNC connector. Twinax I/F
	emulates IBM 5224, 5225, 5226 or 4214 printers with auto-
	terminate/cable-thru capabilities

*Check with your software vendor to make sure these functions are supported.

PN 9001078	SATO CL408e/CL412e Service Manual	Page 1-9
Rev. B