SATO CL412E service manual Card format Yes no, Memory format Yes no, Card Format Yes No

Section 2. Configuration

LCD Panel — Card Mode

Card Format

Yes No

Card format

yes no

Before a PCMCIA card can be used, it must be formatted.

Note: Formatting a card destroys all data currently stored on the Card.

STEP PROCEDURE

1.Use the LINE key to step the underlined cursor to the desired setting. IF Yes is selected, the printer will enter the Card Format mode.

If No is selected, the display will advance to the mode display.

Memory Format Yes No

memory format

yes no

Before the internal Expanded Memory can be used, it must be formatted. Note: Formatting the memory will destroy any stored data.

STEP PROCEDURE

1.Use the LINE key to step the underlined cursor to the desired setting. IF Yes is selected, the printer will enter the Memory Format mode.

If No is selected, the display will advance to the mode display.

To exit the Card Mode, power off the printer, then back on.

card mode

Page 2-24 SATO CL408e/CL412e Service Manual

PN 9001078 Rev. B