Section 2. Configuration

LCD Panel — Advanced Mode

Ignore CR/LF

ignore cr/lf

YES NO

This setting tells the printer to strip out all carriage return/line feed pairs (CRLF) from the data stream, including graphics and 2D bar codes. It is used primarily to maintain compatibility with earlier models of SATO printers.

STEP

PROCEDURE

1.Use the LINE key to step the underlined cursor to either YES or NO.

2.Once the desired setting is underlined, press the FEED key to accept the setting and advance to the Character Pitch display.

Character Pitch

character pitch prop fixed

This setting allows you to set the default character pitch to either fixed character spacing or proportional character spacing.

STEP

PROCEDURE

1.Use the LINE key to step the underlined cursor to the desired setting.

2.Once the desired setting is underlined, press the FEED key to accept the setting and advance to Cover Open Sensor display.

Note: This command can be overriden by the <ESC>PR or <ESC>PS Character Pitch Commands.

Cover Open Sensor

cover open sensor

Yes No

This setting allows the user to enable or disable the Cover Open Sensor. Selecting YES will enable the sensor and selecting NO will disable it.

STEP

PROCEDURE

1.Use the LINE key to step the underlined cursor to the desired setting.

2.Once the desired setting is underlined, press the FEED key to accept the setting and return to the Advanced Mode Display.

Page 2-16

SATO CL408e/CL412e Service Manual

PN 9001078 Rev. B

Page 36
Image 36
SATO CL412E service manual Ignore cr/lf, Cover open sensor Yes No, Ignore CR/LF, Character Pitch, Cover Open Sensor