Note: If you make an error while scanning the digits (before scanning Save), scan Discard on the back cover, scan the Intercharacter Delay bar code, scan the correct digits, and Save again.
Prefix
Scanned Data
Suffix
1 
2 
3 
4
Intercharacter Delay
5
Intercharacter Delay
To remove this delay, scan the Intercharacter Delay bar code, then set the number of steps to 00. Scan the SAVE bar code from the inside back cover.
User Specified Intercharacter Delay
This is a delay of up to 495 milliseconds (in multiples of 5) placed after the transmission of a particular character of scanned data. You can program up to 99 steps (of 5 ms each) to follow the character you specify. Scan the Delay Length bar code below, then the number of steps for the delay, and the SAVE bar code from the inside back cover.
Next, scan the Character to Trigger Delay bar code, then the 2 digit hex value for the ASCII character that will trigger the delay (refer to the Decimal to Hex to ASCII conversion chart on page
Note: If you make an error while scanning the digits (before scanning Save), scan Discard on the inside back cover, scan the Character to Trigger Delay bar code, scan the correct digits, and Save again.
Delay Length
Character to Trigger Delay
To remove this delay, scan the Delay Length bar code, and set the number of steps to 00. Scan the SAVE bar code from the inside back cover.
IT3800/3900 User’s Guide | 4 - 9 |
