Dif Useful Height >= 1.0 X, else F otherwise
In Screening modes, this parameter is reported as "Useful Row Height is Too Short (1.5X)" when that is the case.
{7} lists the Data Safety Margin, which is the ratio of the unused error correc- tion words to the recommended (!) number of such words. Data Safety Mar- gin can exceed 100%, when the ECL is higher than the minimum recommended, or be limited to 50% or lower, even with perfect printing, when the ECL is below minimum. The grade is assigned as:
Aif Safety Margin >= 62%, else
Bif Safety Margin >= 50%, else
Cif Safety Margin >= 37%, else
Dif Safety Margin >= 25%, else
Fotherwise
In Screening modes, this parameter is reported as "Low Data Safety Margin (44%)" when that is the case.
{8} lists the Edge Accuracy measured in the Start or Stop patterns. The grade is assigned as:
Aif Edge Accuracy >= 62%, else
Bif Edge Accuracy >= 50%, else
Cif Edge Accuracy >= 37%, else
Dif Edge Accuracy >= 25%, else
Fotherwise
In Screening modes, this parameter is reported as "Poor Edge Accuracy (59%)" when that is the case.
{9} lists the Print Growth measured in the Start or Stop patterns (the growth of the dark modules or "bars"). The grade is assigned as:
Aif Print Growth is between +/- 20%, else
Bif Print Growth is between +/- 30%, else
Cif Print Growth is between +/- 40%, else
Dif Print Growth is between +/- 50%, else
Fotherwise
In Screening modes, this parameter is reported as "Excessive Print Growth (33%)" or "Excessive Print Shrinkage
1 - 7
