If your imager is in keyboard wedge mode, enable Screening by scanning the following bar codes.
Minimum Acceptable | Minimum Acceptable |
Grade = A | Grade = B |
Minimum Acceptable | Minimum Acceptable |
Grade = C | Grade = D |
You can exit both Full Report and Screening modes by either typing the menu command, 2D_PQA0, if you are using Quick*View, or by scanning the following bar code:
Exit
Identifying Symbol Content
To identify content or "format" aspects of a symbol, 2D PQA modes report the less than obvious characteristics of a symbol. For quality determination, 2D PQA reports those parameters that both relate directly to the print or creation process, and that also remain relatively consistent over a range of hand held reading situations.
In the 2D PQA Full Report mode, successful scans of a 2D symbol output a message similar to the following (with slight variations based upon the symbol- ogy being tested):
This is a representative PDF417 symbol
>>> PQA from HHP <<<
PDF417: 11 rows x 3 cols, 25 data & 8 chks (ECL = 2) X roughly = 0.014"
[A] < Row Height = 3.1 X
[A] < Useful Row Height = 2.5 X (82% Row)
[A]< Data Safety Margin = 100% (0 Erasures & 0 Errors)
[B]< Edge Accuracy = 59%
[C]< Print Growth =
1 - 4
