3. Secure the DIN Rail to the horizontal mounting surface.
Using the Wall Mount Kit
Wall mount kits can be purchased separately to secure the Net Base to a wall or other vertical surface. You need to purchase two kits so that you have two mounting brackets, one for each end of the Net Base. Each mounting bracket contains an open slot in the back to accommodate the connector cables.
1.Insert the round end of a screw into the round end of each screw slot. Slide each screw towards the narrow end of the slot.
2.Use one washer/nut set on each screw to secure the screw in each slot. Washer/nut sets and screws in slots
10 | Dolphin® 7900 Series Net Base Quick Start Guide |
