Toshiba D-VR3SU owner manual Making One Touch Recording OTR, VCR Plus+ Record, Pausing / Resuming

Recording the current channel you are watching

DVD-RAM DVD-RW DVD-R

1.Check the antenna cable is connected.

2.Check the remaining time of disc.

DVD-RAM/DVD-RW/DVD-R discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

1	Press the OPEN/CLOSE button and place a record-
	able disc on the disc tray.
2	Press the CHANNEL / button to select
	the channel you want to record.

4	Press the REC button.
	• / is displayed on the screen and recording
	begins.
5	Press the STOP button to stop or finish a recording
	in progress.

• The message “Updating the information of disc. Please wait for a moment”.

Pausing / Resuming

•Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again during pause to resume recording.

•You can switch channels by pressing the CH / buttons while recording pauses.

Making One Touch

Recording (OTR)

DVD-RAM DVD-RW DVD-R

One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the touch of a button.

1	Insert the disc.
	Use the channel / button or number

buttons to select the channel to record.

•CATV channel: 1 to 125

•TV channel: 2 to 69

2 Start Recording.

VCR Plus+ Record

DVD-RAM DVD-RW DVD-R

1.Check the antenna cable is connected.

2.Check the remaining time of the disc.

3.Check the date and time are correct.

Make sure the Clock has been set (Setup - System Setting) before you proceed with a timer recording.

Press the MENU button.

1 • Press the ❷ buttons to select Timer Rec and then press the ENTER or ❿button.

• Select VCR Plus+ Record

DVD-RAM(VR) Timer Record

Setup VCR Plus+ Record

Timer Record

Timer Rec.

Scheduled Record List

3	Press the REC Speed button on remote control, to
	select the recording speed (quality).
	• XP(High, approx. 1 hour) SP(Standard, approx.

	2 hours) LP(Low, approx. 4 hours) EP(Extended
	Play, approx 6 hours)
Recording
		RAM

Note

You can’t change the recording mode and channel

during recording.

Recording will stop automatically if there is not

enough space for recording.

Up to 99 titles can be recorded onto a disc.

If the power interrupted due to power failure or

other reasons, the title being recorded will not be

saved onto the disc.

Recording will stop automatically if a copy protect-

ed image is input.

Do not use DVD-R authoring discs with this unit.

Follow the instructions on page 62 to begin record-

ing.

3	Activate OTR.
	While in Record mode, press the REC button again
	to activate One-Touch Recording (OTR).
	• Record length 0:30 appears on the On-Screen
	Display and the DVD Recorder-VCR will record
	for exactly 30 minutes.

4	Add Recording Time.
	Continue pressing REC to add recording time in 30

minute increments up to 4 hours.

• The DVD Recorder-VCR stops recording automat- ically when the time has elapsed.

Copy

Title List

Playlist

Disc Manager

MOVE SELECT RETURN EXIT

• If the current time is not set. Set the current time first.

				Recording
2	Enter VCR Plus+ Code number.
		DVD-RAM(VR)	VCR Plus+ Record

Setup

Timer Rec.

Enter VCR plus+ Code number. [0-9]

Copy

Title List

Playlist

Disc Manager

MOVE SELECT RETURN EXIT

DVD-RAM(VR) VCR Plus+ Record

Setup

Timer Rec.

Copy

Title List

Playlist

Disc Manager

Enter VCR plus+ Code number. [0-9]

9 2 3 0 1 7 5 8

MOVE SELECT RETURN EXIT

62 - English English - 63