English - 33
System Setup
32 - English
System Setup
Select Change Password using ❷ buttons, then
press the ❿or ENTER button.
• The ‘Enter the password.’ message will be
displayed.
1
Enter the 4-digit password using the 0 to 9 buttons
on the remote.
• The ‘Confirm the password.’ message will be dis-
played.
2
Enter your password again using the 0 to 9 buttons
on the remote.
3
About the Change Password;
Press the RETURN or ➛button to return to the
previous menu. Press the MENU button to exit the
menu.
Note
Auto Channel Memory
Auto Channel Memory will automatically seek and store all
active channels in your area.
Open “MENU”
With the DVD in stop mode, press the MENU but-
ton.
1
Select “SETUP”
Using the ❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2
Select “Channel Set”
Using the ❷ buttons, move the selection bar to
“Channel Set”, then press ENTER to select.
3
Run “Auto channel memory”
Move the selection arrow to “Auto Channel
Memory,” then press ENTER to select.
• The DVD Recorder-VCR will automatically
search for all available channels in the selected
Tuner Band. This procedure may take a few
minutes to complete.
• When finished, the lowest channel found will
be displayed.
•Press ENTER button to STOP or cancel scan-
ning.
4
Select Rating Level you want using ❷ buttons,
then press the ❿or ENTER button.
• For example, if you select up to Level 6, discs that
contain Level 7, 8 will not play. Larger number
indicates the program is more intended to adult
use only
6
Press the RETURN or ➛button to return to the
previous menu. Press the MENU button to exit the
menu.
Refer to Troubleshooting if you forget your pass-
word.
Note
Setting Up the Parental
Control
The Parental Control function works in conjunction with
DVDs that have been assigned a rating - which helps you
control the types of DVDs that your family watches. There
are up to 8 rating levels on a disc.
Select Setup using ❷ buttons, then press the ❿
or ENTER button.
2
Select Parental control using ❷ buttons, then
press the ❿or ENTER button.
3
Enter the 4-digit password using the 0 to 9 buttons
on the remote.
• The ‘Confirm the password.’ message will be dis-
played. Enter your password again.
4
Select Password ON/OFF using ❿and ❷ but-
tons.
5
With the unit in Stop mode, press the MENU but-
ton on the remote.
1
On
Off