Toshiba D-VR3SU owner manual Channel Add/Delete, RF Output Channel, Guide Channel Setup

Channel Add/Delete

Use this feature if Auto Channel Search missed a

channel that you would like to add and delete a channel you wish to remove.

	1	Open “MENU”
		With the DVD in stop mode, press the MENU
		button.
Setup	2	Select “Setup”
		Using the ❷ buttons, move the
		selection bar to “Setup” then press ENTER to select.
ystemS
			DVD-VIDEO

4	Select “Channel Add/Delete”
	Move the selection bar to “Channel Add/Delete,”

then press ENTER to select.

5	Select Channel to Add/Delete
	Use the CH / buttons to tune in the channel

number you wish to add or delete.

Use the number buttons to move the channel direct- ly. If you use the navigation ❷ button, the chan- nel will be moved to the next memorized channel.

DVD-VIDEO

DVD-VIDEO

RF Output Channel

When you connect the DVD Recorder-VCR to TV with RF Antenna Cable, follow the steps below to set the

RF output channel.

1	Open “MENU”
	With the DVD in Stop or Play mode, press the
	MENU button.
2	Select “Setup”
	Using the ❷ buttons, move the selection bar to
	“Setup” then press ENTER to select.

4	Select “RF Output Channel”
	Move the selection bar to “RF output Channel”,

then press right to change.

5	Change “RF Output CH”
	Select channel 3 or 4 using the ❷ button.	System
	Then press ENTER to change.
		Setup
6	Change “TV Channel”
	A message will appear on your TV. When the mes-

sage disappears, change your TV to channel 3 or 4 to match the RF output channel of the player.

Guide Channel Setup

3	Select “Channel Set”
	Using the ❷ buttons, move the selection bar to
	“Channel Set”, then press Enter to select.
		6	Add/Delete Channel.
			Press Enter to move the cursor to select Add, then
	DVD-VIDEO
			press ❿ if you want to select Delete. Press ENTER
			to confirm your selection.

3	Select “Channel Set”
	Using the ❷ buttons, move the selection bar to

“Channel Set,” then press ENTER to select.

Set these guide channels so you can use VCR Plus+ codes for timer recording. Before starting the settings, prepare a chart showing the channels, station names and guide channels.

1	Open “MENU”
	With the DVD in stop mode, press the MENU
	button.
2	Select “Setup”
	Using the ❷ buttons, move the selection bar to

“Setup” then press ENTER to select.

34 - English English - 35