Toshiba D-VR3SU Auto Clock Set, Manual Clock Set, Time Zone, Clock Data CH Daylight Saving

Auto Clock Set

This menu is used to set the current time. You need to set the time to use timer recording.

1 With the unit in Stop mode, press the MENU button.

No Disc

4	Select Auto Clock Set using the ❷ buttons, then
	press the ❿ or ENTER button.
		No Disc		Clock Set
			Auto Clock Set
			Manual Clock Set

Time ZONE

Select the time zone of your area using the ❷
but- tons then press the ❿
or ENTER button. Select Automatic to set the time zone automatically.

No Disc		Auto Clock Set
	Clock Data CH		Automatic
	Time Zone		: AutomaticAtlantic
	Daylight Saving		: AutomaticEastern
			Central
			Mountain
			Pacific
			Alaska
			Hawaii

Manual Clock Set

If Auto Setup fails to set the DVD Recorder-VCR’s internal clock by locating a local TV station, follow these steps to set the date and time manually.

NOTE: For accurate Timer Recording, your DVD Recorder- VCR's internal clock must be set correctly.

Note

You must have the antenna connected to set the

Auto Clock. See page Antenna Connections

The Clock will be automatically set when you turn

off the recorder.

1	Open “MENU”
	Press the MENU button while the DVD or VCR is
	in Stop or Play mode.

System Setup

2	Using the ❷ buttons, move the selection bar to
	“Setup” then press Enter to select.
3	Select Clock Set using the ❷ buttons, then press
	the ❿ or ENTER button.
		No Disc

Select the sub menu (Clock Data CH, Time Zone or

5 Daylight Saving) using the ❷ buttons, then press the ❿ or ENTER button.

No Disc		Auto Clock Set
	Clock Data CH	: Automatic
	Time Zone	: Automatic
	Daylight Saving	: Automatic

Clock Data CH

Daylight Saving

Select the On, Off or Auto using the ❷
buttons then press the ❿
or the ENTER button.

Select Automatic to set the daylight saving automatically.

No Disc		Auto Clock Set
	Clock Data CH	: Automatic
	Time Zone	: Automatic
	Daylight Saving		Automatic
			Yes
			No

2	Select “Setup”
	Using the ❷ buttons, move the selection bar to
	“Setup” then press ENTER to select.
3	Select “Clock Set”
	Use the ❷ buttons to highlight “Clock Set”

then press the ENTER button.

System Setup

Select a channel that carries a time signal using the ❷
buttons then press the ❿
or ENTER button. Select Auto to set the channel automatically.

No Disc Clock Data CH

Select channel : Auto

Note

If your clock is set to the wrong time zone or day-

light saving, you can adjust these settings without

turning off the Auto Clock Set function.

4	Select “Manual Clock Set”
	Move the highlight to “Manual Clock Set”, then

press the ENTER button.

• The Clock Set will change as shown.

26 - English English - 27