If Your DNS Server Does Not Support Bind 8.3 or Later

If your DNS server does not support Bind version 8.3 or later, Hyperterminal™ or an equivalent terminal emulator program must be installed on the host PC to configure the Net Base.

1.Connect the serial cable to the Serial DB-9 Connector on the back of the Net Base and a COM port on the host computer.

2.Start Hyperterminal or an equivalent terminal emulator program. Use these settings: 115200 bps, 8,N,1.

3.Power up and wait until the COMM LEDs have stopped flashing. The COMM LEDs stop flashing when the Net Base has found the DHCP server.

4.Enter the user name <handheld> and default login password <handheld> to log into Net Base configuration utility. The Net Base menu program displays.

*************************************************

* Welcome to the Hand Held Products Net Base *

*************************************************

SD00032Login: handheld

Password: ********

1)View System Configuration

2)View Current Values

3)Express Setup

4)Advanced Setup

5)System Statistics

6)System Diagnostics

7)Help

x) Exit

Enter choice: 2

5.Enter choice 2 (View Current Values) to display IP addresses.

6.Record the IP address for the Ethernet port.

7.Open the web browser on your PC and enter the IP address for the Net Base you wrote down in Step 6.

8.Press ENTER and the online configuration utility displays on your PC.

Dolphin® 7900 Series Net Base Quick Start Guide

5

Page 9
Image 9
HandHeld Entertainment 7900 quick start If Your DNS Server Does Not Support Bind 8.3 or Later