!Thecenter speaker largely determines the
soundimage and getting the balance right
isn’teasy. We recommend reproducing a 2-
ch.audio (a CD for example) and getting
thebalance right among the speakers ex-
ceptfor the center, and then reproducing a
5.1-ch.audio (Dolby Digital or DTS) and ad-
justingthe center speaker output to the
balanceyou have already got among the
otherspeakers.
1 TouchParametric EQ.
2 Touchaor bto select the desired item.
Eachtime you touch aor bselects the item
inthe following order:
Equalizer(equalizer)—SP-Select (speakers)—
Band(bands)—Frequency (center frequency)
—Level(equalizer level)—Q. Factor (Q factor)
3 Touchdto select the equalizer.
Touchdrepeatedly to switch between the fol-
lowingequalizers:
Powerful—Natural—Vocal—Flat—Custom1
—Custom2—SuperBass
4 Touchband then touch cor dto se-
lectthe speaker to be adjusted.
Touchcor duntil the desired speaker ap-
pearsin the display.
Rear(rear speakers)—Center (center speaker)
—Front(front speakers)
#Youcannot select speakers whose size is set
toOff. (Refer to Setting the speaker setting on
page86.)
5 Touchband then touch cor dto se-
lectthe equalizer band to be adjusted.
Eachtime you touch cor dselects equalizer
bandsin the following order:
Low(low)—Mid (mid)—High (high)
6 Touchband then touch cor dto se-
lectthe center frequency of selected band.
Touchcor duntil the desired frequency ap-
pearsin the display.
40Hz—50Hz—63Hz—80Hz—100Hz—125Hz
—160Hz—200Hz—250Hz—315Hz—400Hz
—500Hz—630Hz—800Hz—1kHz—1.25kHz
—1.6kHz—2kHz—2.5kHz—3.15kHz—4kHz
—5kHz—6.3kHz—8kHz—10kHz—12.5kHz
7 Touchband then touch cor dto ad-
justthe equalizer level.
Eachtime you touch cor dit increases or de-
creasesthe equalizer level. +12 to -12 is dis-
playedas the level is increased or decreased.
8 Touchband then touch cor dto se-
lectthe desired Q factor.
Eachtime you touch cor dswitches between
thefollowing Q factor:
Narrow(narrow)—Wide (wide)
#Youcan adjust parameters for each band of
theother speakers in the same way.
Note
Youcan select a center frequency for each band.
Youcan change the center frequency in 1/3-oc-
tavesteps, but you cannot select frequencies that
haveintervals shorter than 1 octave among the
centerfrequencies of the three bands.
Using the auto-equalizerTheauto-equalizer is the equalizer curve cre-
atedby auto TA and EQ (refer to Auto TA and
EQ(auto-time alignment and auto-equalizing)
onthis page).
Youcan turn the auto-equalizer on or off.
1 TouchAuto EQ.
#Youcannot use this function if auto TA and
EQhas not been carried out.
2 Touchdto turn the auto-equalizer on.
#Toturn auto-equalizer off, touch c.
Auto TAand EQ (auto-timealignment and auto-equalizing)Theauto-time alignment is automatically ad-
justedfor the distance between each speaker
andthe listening position.
Available accessories
En
90
Section
19