Adjustingthe time alignment

Youcan adjust the distance between each
speakerand the selected position.
!Anadjusted time alignment is memorized
inCustom.
1 TouchTime Alignment and then touch
TAAdjust.
#Youcannot select TA Adjust when neither
Front-Lnor Front-R is selected in Position.
2 Touchaor bto select the speaker to
beadjusted.
Eachtime you touch aor bselects the speak-
erin the following order:
Front-L(front speaker left)Center (center
speaker)Front-R(front speaker right)
Rear-R(rear speaker right)Rear-L (rear
speakerleft)Subwoofer (subwoofer)
#Youcannot select speakers whose size is set
toOff. (Refer to Setting the speaker setting on
page86.)
3 Touchcor dto adjust the distance be-
tweenthe selected speaker and the listen-
ingposition.
Eachtime you touch cor dincreases or de-
creasesthe distance. 0.0inch to 200.0inch is
displayedas the distance is increased or de-
creased.
Using the equalizer
Theequalizer lets you adjust the equalization
tomatch the car s interior acoustic character-
isticsas desired.

Recallingequalizer curves

Thereare seven stored equalizer curves which
youcan easily recall at any time. Here is a list
ofthe equalizer curves.
Display Equalizercurve
Powerful Powerful
Natural Natural
Vocal Vocal
Flat Flat
Custom1 Custom1
Custom2 Custom2
SuperBass Superbass
!Custom1and Custom2 are adjusted equal-
izercurves.
!WhenFlat is selected, no supplement or
correctionis made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternatively between
Flatand a set equalizer curve.
1 TouchParametric EQ.
2 Touchaor bto select the desired item.
Eachtime you touch aor bselects the item
inthe following order:
Equalizer(equalizer)SP-Select (speakers)
Band(bands)Frequency (center frequency)
Level(equalizer level)Q. Factor (Q factor)
3 Touchdto select the equalizer.
Touchdrepeatedly to switch between the fol-
lowingequalizers:
PowerfulNaturalVocalFlatCustom1
Custom2SuperBass

Adjusting3-band parametric equalizer

For Custom1and Custom2 equalizer cur ves,
youcan adjust the front, rear and center
equalizercurves separately by selecting a cen-
terfrequency, an equalizer level and a Q factor
foreach band.
!Aseparate Custom1 curve can be created
foreach source.
!ACustom2curve can becreated common
toall sources.
Available accessories
En 89
Section
19
Availableaccessories