Pioneer AVH-P3100DVD operation manual Correcting distorted sound, Resetting the audio functions

Section

15Initial Settings

1Touch PIN Code Input on the initial menu.

PIN code input display appears.

2Touch 0 to 9 to input the PIN code of

your Bluetooth audio player.

# To cancel the inputted numbers, touch C.

3After inputting PIN code (up to 16 di- gits), touch .

The PIN code you entered is stored in this sys- tem.

Correcting distorted sound

You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause dis- tortion. If high sound is crippled or distorted, try switching to Low. Normally, leave the set- ting at High to ensure quality sound.

!Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function.

%Touch Digital ATT on the initial menu to switch the digital attenuator setting. Touch Digital ATT repeatedly until the desired setting appears in the display.

!High – High quality sound

!Low – Minimize distortion sound

Auto TA and EQ (auto-time alignment and auto- equalizing)

The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position.

The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information.

!Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function.

Please see the following section for Auto TA and EQ operation. Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 90

Resetting the audio functions

You can reset all audio functions except vo- lume.

!Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function.

1Touch Audio Reset on the initial menu.

2Touch Reset.

3Touch Reset again to reset audio func-

tions.

# To cancel resetting the audio functions, touch Cancel.

52 En