Carryingout auto TA and EQ
1 Stopthe car in a place that is as quiet
aspossible, close all doors, windows and
thesun roof, and then turn the engine off.
Ifthe engine is left running, engine noise may
preventcorrect auto TA and EQ.
2 Fixthe supplied microphone in the cen-
terof the headrest of the drivers seat, fa-
cingforward, using the belt (sold
separately).
Theauto TA and EQ may differ depending on
whereyou place the microphone. If desired,
placethe microphone on the front passenger
seatto carry out auto TA and EQ.
3 Turnthe ignition switch to ON or ACC.
Ifthe car s air conditioner or heater is turned
on,turn it off. Noise from the fan in the air
conditioneror heater may prevent correct auto
TAand EQ.
#PressSRC/OFF to turn the source on if this
unitis turned off.
4 Selectthe position for the seat on
whichthe microphone is placed.
Referto Using the position selector on page
83.
#Ifno position is selected before you start auto
TAand EQ, Front-L is selected automatically.
5 Touchthe source icon and then touch
Offto turn this unit off.
6 Touchthe screen to display the touch
panelkeys.
7 TouchAV Menu and then touch
InitialMenu to display the function names.
8 TouchAuto EQ&TA to enter the auto TA
andEQ measurement mode.
9 Plugthe microphone into the micro-
phoneinput jack on the multi-channel pro-
cessor.
Fordetails concerning operation, refer to the
multi-channelprocessor s operation manual.
10 TouchStart to start the auto TA and EQ.
11 Getout of the car and close the door
within10 seconds when the 10-second
count-downstarts.
Themeasurement tone (noise) is outputted
fromthe speakers, and auto TA and EQ be-
gins.
#Whenall speakers are connected, auto TA
andEQ is completed in about nine minutes.
#Tostop auto TA and EQ, touch Stop.
#Tocancel auto TA and EQ on the way,touch
Backor ESC.
12 Whenauto TA and EQ is completed,
Completeis displayed.
Whencorrect measurement of car interior
acousticcharacteristics is not possible, an
errormessage is displayed. (Refer to Under-
standingauto TA and EQ error messages on
page98.)
13 TouchESC to cancel the auto TA and EQ
mode.
Available accessories
En
92
Section
19