Manuals / AEG / Kitchen Appliance / Dishwasher

AEG 64800 manual Before using your dishwasher for the first time, Setting the water hardness range

Models: 64800

1 43

Download 43 pages 6.59 Kb

Page 12

Before using your dishwasher for the first time

12

Before using your dishwasher for the first time

1.Ensure that the electrical and water connections comply with the installation instructions.

2.Remove all packaging from inside the appliance.

3.Set the water softener.

4.Pour 0,5 l of water inside the salt container and then fill with salt.

5.Fill the rinse-aid dispenser.

Setting the water hardness range

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, German, French degrees and PPM (parts per Million).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 4.

If this level is not suitable for your area the softener should be adjusted.

Level						Water hardness							Use of salt

			°dH					°TH			PPM
			(german degrees)					(french degrees)			(parts per million)


0			0 - 4					0 - 8			0 - 80		NO
1			5	- 8				9 - 14			81 - 140		YES
2			9 - 11					15 - 20			141 - 200		YES
3			12	- 17				21 - 30			201 - 300		YES
4			18	- 22				31 - 40			301 - 400		YES
5			23	- 28				41 - 50			401 - 500		YES
6			29	- 33				51 - 60			501 - 600		YES
7			34	- 39				61 - 70			601 - 700		YES
8			40	- 45				71 - 80			701 - 800		YES
9			46	- 50				81 - 90			801 - 900		YES

Image 12

AEG 64800 manual Before using your dishwasher for the first time, Setting the water hardness range, Level, Water hardness

Contents

ÖKOFAVORIT Operating instructions Instrucciones de usoDishwasher Lavavajillas Dear customer Contents Safety instructionsMaintenance and cleaning Customer serviceSafety instructions Using your dishwasher for its intended purposeBefore using your dishwasher for the first time Child safetyYour dishwasher in day-to-day use Disable the door lock so that the door no longer closes Disposing of packaging and old machineDisposing of the packaging Disposing of your old machineEconomical and ecological dishwashing 1. On/Off indicator light 2. On/off pushbutton Description of the applianceThe inside of the appliance Control panelProgramme phase indicator lights Indicator lightsDoor handle Digital displayInstruction accepted audible signal Programme run audible signalEnd of programme audible signal Alarm audible signalSO280 Before using your dishwasher for the first time Setting the water hardness rangeLevel Water hardnessTo set a different level, proceed as follows Filling with special salt To fillThe rinse-aid Filling up the rinse-aidEnsure that the lid is closed after every refill Adjusting the dose When buying new dishes, ensure that they are dishwasher proof Loading cutlery and dishesDo not load very small items which can fall through the baskets The lower basket Removable knife basketTo lower the prongs Cutlery basket The upper basket Before closing the door, ensure that the spray arms can rotate freelyAdjusting the height of the upper basket 2. Refit the basket in the higher position and replacethe stops A in their original position If using powder detergents proceed as follows If using detergent in tablets proceed as followsUse of detergent Only use detergents specifically designed for use in dishwashersBIO programmes and compact powders Washing programmes ProgrammesType of soil RequiredApproximate values Cycle descriptionProgramme EnergyOperating instructions 1. Check the filters2. Press the On/Off pushbutton 3. Check that there is rinse aid and saltThe setting of the programme may occur If the setting of the programme has been made with the door openedIf the setting of the programme has been made with the door closed 8a. Set and start the programme without delay start8b. Set and start the programme with delay start If the setting of the programme has been made with the door openedIf the setting of the programme has been made with the door closed 10. To cancel a programme 9. At the end of the washing programmeA programme underway is interrupted when you open the door Maintenance and cleaning Internal and external cleaningCleaning the filters Under no circumstances may the dishwasher be used without filters a flashing fault code appears What to do, whenproblems occur during use of the dishwasher The dishes are not cleanthe wash results are not satisfactory Visible lime deposits or white film on the dishesCustomer service Hints for test centres Arrangement upper basketArrangement lower basket Technical data Technical specificationsThis appliance complies with the following E.E.C. Directives Installation and connection instructions Adjusting the worktopFitting under a counter LevellingConnecting the water supply Water outlet connection Extension hoses + 2 m maxSafety standards require the appliance to be earthed Water protection systemElectrical connection Copyright by AEG 152985 56/1AEG Hausgeräte GmbH Postfach D-90327 Nürnberg