28
8b. Set and start the programme with "delay start"
●Select the wash programme by simply pressing one of the programme pushbuttons, the display will show the running time of the programme in minutes and the indicator lights of the phases corresponding to the programme will illuminate.
●If necessary select the "small load" by pressing the corresponding pushbutton (in this case the running time of the programme will be adequated).
With the selection of the programmes "Quick 50°C" and "Rinse and Hold" the small load option is not available.
●Press the "delay start" pushbutton, in the display appears h1. Select the time by pressing repeatedly the "delay start" pushbutton until the required number of hours appear in the display. You can delay the start of a programme up to a maximum of 12 hours (h12).
To cancel the setting of the delay start press the pushbutton until the running time of the selected programme reappears in the display.
●If the setting of the programme has been made with the door opened:
close the door and the dishwasher starts the countdown automatically after 5 seconds. The number of hours to go before the programme starts appears in the display and decreases from hour to hour. The letter h flashing in the display indicates that the delay start is active.
●If the setting of the programme has been made with the door closed:
the dishwasher will start the countdown automatically after 5 seconds from the last pressure of a pushbutton.
●Once the delay set has elapsed the programme will start automatically, the indicator lights of the phases turn off except for the light of the phase under way. The displayed time will start to decrease from minute to minute.
