AEG 64800 problems occur during use of the dishwasher, the wash results are not satisfactory

Models: 64800

1 43
Download 43 pages 6.59 Kb
Page 34
Image 34
...problems occur during use of the dishwasher

...problems occur during use of the dishwasher

Malfunction

The programme does not start

The machine is noisy

The door is difficult to close

Possible cause

The plug is not properly inserted in the power socket.

There is no current at the socket.

Dishes are rattling against each other.

The spray arms are knocking against the dishes.

The dishwasher is not level, or not properly built-in.

Remedy

Insert the plug.

Load correctly crockery, cutlery, pots and pans. Refer to "Loading cutlery and dishes"

Refer to "Installation" instructions.

34

...the wash results are not satisfactory

Visible lime deposits or white film on the dishes

Check that the right level of the water softener is setted.

Check that there is salt.

The dishes are not quite dry

The rinse aid has run out or too little is being used.

The dishes are not clean

The baskets are too full.

The dishes have not been arranged properly.

The spray arms do not rotate because incorrect loading of the baskets.

The filters are clogged.

The filters are not in position.

Not enough detergent has been used or it is unsuitable.

The detergent is old or has gone hard.

The salt container cap is not properly closed.

The washing programme is too gentle.

Page 34
Image 34
AEG 64800 problems occur during use of the dishwasher, the wash results are not satisfactory, The dishes are not quite dry