Rinse-aid, Filling up the rinse-aid | AEG 64800 manual

Important: The salt refill indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuring the dishwasher remains on. If you are using salts that take longer to dissolve then this can take longer. The function of the dishwasher is not affected.

The rinse-aid

The rinse-aid ensures brilliant crockery and also helps it to dry. It is automatically dosed in during the hot rinsing cycle. The storage compartment built in to the in side of the door can hold about 110 ml of rinse-aid, which will be sufficient for between 16 and 40 dishwashing programmes, according to the dosage setting.

Filling up the rinse-aid

1.Open the container by turning the lid (A) anticlockwise.

2.Add the rinse aid until the container is completely full. The indicator (B) will be completely dark.

Ensure that the lid is closed after every refill.

Top up with rinse aid when the rinse aid indicator light on the control panel illuminates.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Attention! Do not put liquid detergent in the rinse aid department.

A

BR01

B
	x	6	5	4	3
	x				3
m	a				2
m					1
					1
BR03

15

Image 15

AEG 64800 manual Rinse-aid, Filling up the rinse-aid, Ensure that the lid is closed after every refill

Contents

Ökofavorit Please read these user instructions carefully Dear customer Contents Child safety Safety instructionsUsing your dishwasher for its intended purpose Before using your dishwasher for the first time Your dishwasher in day-to-day use Disposing of your old machine Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of the packaging Economical and ecological dishwashing Inside of the appliance Description of the appliance Salt Programme phase indicator lightsIndicator lights Door handle Digital display Small load pushbutton Delay start pushbutton SO280 Setting the water hardness range Before using your dishwasher for the first time To set a different level, proceed as follows To fill Filling with special salt Rinse-aid Filling up the rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Lower basket Removable knife basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent If using detergent in tablets proceed as follows BIO programmes and compact powders Washing programmes Cycle description Approximate values Operating instructions Setting of the programme may occur 8a. Set and start the programme without delay start 8b. Set and start the programme with delay start At the end of the washing programme To cancel a programmePage Maintenance and cleaning Internal and external cleaningCleaning the filters Together What to do, when Flashing fault code appears Visible lime deposits or white film on the dishes Problems occur during use of the dishwasherDishes are not clean Wash results are not satisfactory Customer service Hints for test centres Technical specifications Technical data Levelling Installation and connection instructionsAdjusting the worktop Fitting under a counter Connecting the water supply Water outlet connection Extension hoses Electrical connection Water protection system Copyright by AEG 152985 56/1