Hans Grohe 35116801 Push the baseplate against the wall, Thread the sleeves into the rough

Models: 35115801 35116801

1 16

Page 8

Lightly lubricate the o-rings on the spout and handle escutcheons with the enclosed lubricant (1). Push the escutcheons onto the baseplate (2).

Image 8

The first step is to push the baseplate against the wall.

You can use the service key to tighten the retaining nuts.

Yes, lightly lubricate the o-rings with the enclosed lubricant before pushing the escutcheons onto the baseplate.

Contents

Steel SteelInstallation Instructions / Warranty Technical Data Wall Mounted Single-HandleLav Set with Base Plate35115801 Wall Mounted Single-HandleLav SetPage Install the cartridge assembly Remove the covers from the plaster shieldsIf you are installing 35116801, turn to page Installation with all modelsIf you are installing 35115801, turn to page Model 35115801 only Connect the fixation nuts to the sleeves Thread the sleeves into the rough Tighten the retaining nuts with the service keyPush the baseplate against the wall Page Model 35116801 only Push the flange over the handle Install the handle escutcheon onto the sleevePush the sealing ring into the handle escutcheon Page User Instructions 35115801Replacement Parts 35116801Cleaning Recommendation for Hansgrohe Products Limited Lifetime Consumer WarrantyCleaning Materials for Faucets and Showers Cleaning Instructions for Faucets and ShowersTel. 770 360-9880 Fax