FIGURE AA

FIGURE BB

To Operate The Bandsaw:

1.Before starting the Bandsaw make sure all adjustments are properly made and all of the guards are in place.

2.Before turning on the power, turn the Belt Pulley (23B) by hand to make sure there is no binding of moving parts.

3.Keep the Upper Blade Guide Assembly (See Figure W) down as close to the material being cut as possible.

4.When turning on the Bandsaw, allow the machine to reach its full speed before cutting the material.

5.Do not force the material into the Saw Blade. Light contact with the Saw Blade will permit easier following of the line and prevent undue friction, heating and work-hardening of the Saw Blade at its back edge.

6.Keep the Saw Blade sharp for easier forward pressure when cutting.

7.Move the material slowly and steadily against the Saw Blade.

8.Avoid twisting the Saw Blade when attempting to turn sharp corners. Remember to saw around corners.

SKU 32208/32206 For technical questions, please call 1-800-444-3353.

PAGE 17

Page 17
Image 17
Harbor Freight Tools 32206, 32208 manual Figure AA, To Operate The Bandsaw