2.Do not introduce water into the electric motor through the motor vents.
3.Do not use solvents to wipe off the Bandsaw, as damage may result.
4.With a brush or soft cloth, remove all the sawdust from the Bandsaw.
5.If necessary, wipe with a damp cloth. You may use a mild detergent.
6.Once clean, lubricate all moving parts with a light oil.
7.When storing, keep the Bandsaw covered with a cloth cover.
8.Before each use, inspect the general condition of the Bandsaw. Inspect switch, power plug and cord assembly, and extension cord (if used) for damage. Check for loose screws, misalignment, binding of moving parts, broken, cracked, or improper mounting of saw blade, broken parts and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, turn off the Bandsaw immediately and have the problem corrected before further use. Do not use damaged equip- ment.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DIS- TRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANU- FACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
NOTE: Some parts are listed and shown on the following pages for illustration purposes only, and are not available individually as replacement parts.
SKU 32208/32206 For technical questions, please call | PAGE 19 |
