Chip Discharge

Chute (9)

Adapter (52)

Figure 11

1.To add Adapter, slide it into the Discharge Chute.

Fence Assembly (2)

Chip

Discharge

Chute (9)

Adapter (52)

and thread the Radius Pin (6) clockwise into the hole shown above.

Ring Guard (11)

Radius Pin (6)

Figure 22

Table Top (7)

 

2.Install the Ring Guard.

 

 

 

 

 

Miter Gauge

 

Miter Bar (1c)

Miter Knob (1d)

 

Slots to secure

 

 

Miter Scale (1a)

 

workpiece

 

Figure 20

2.Use the four Bolts (10) to secure the Chute onto the Fence Assembly (2). Attache your vacuum to the end of the Chute or Adapter.

Radius Pin

The Radius Pin (6) is used as a guide for freeform work, in place of the Fence Assembly (2).

Other possible location

Radius Pin (6)

for Radius Pin

Figure 23

Miter Indicator (1b)

The Miter Gauge Assembly (1) is an adjustable guide that slides along the channel in the Table Top (7) to guide the workpiece into the blade at a specific angle. The unit is adjustable from 0° to ±60°. The workpiece can be secured to the Miter Gauge with pan head screws through the two slots in the face of the gauge.

Figure 21

Table Top (7)

1.To set up the Shaper/Router for freeform projects, remove the Fence Assembly (2)

 

 

REV 10e

Page 16

For technical questions, please call 1-800-444-3353.

SKU 32650

Page 16
Image 16
Harbor Freight Tools 32650 operating instructions Radius Pin, Miter Gauge