10.When the drilling or milling is completed, press in on the Emergency Stop Switch and close its cover.
11.Unplug the line cord from the electrical outlet and clean the machine of all debris.
Maintenance
Caution: Avoid injuries or damage to equipment. Before performing any maintenance on this machine, unplug the power cord from the electrical outlet.
Lubrication Requirements
1.Using a light oil and clean cloth, after each use, wipe down all metal parts of the machine to prevent rusting.
2.Using machine lubrication grease, periodically apply to the
Periodic General Maintenance
1.Inspect all moving parts for lack of lubrication. If necessary, lubricate as described above.
2.Using compressed air, blow the machine clean of all foreign material. Wear eye protection during this operation.
3.Check all adjustment screws, bolts, and handles for tightness.
4.Store cutting tools in a wooden box or other moisture proof package.
5.Cover the machine when not in use.
6.Sharpen cutting tools as soon as they become dull.
7.Always keep the taper shank clean.
8.Store all tools and accessories in a clean and dry location, near the machine.
9.Always use the supplied tools and wrenches to make repairs and adjustments.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 44991 | Page 8 |
