Maintenance information and precautions
Removing dust from inside the
viewfinder
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(2) Clean the surface with a commercially available blower.
1
To reattach the eyecup
(1) Align the groove on the eyecup with the • mark on the barrel.
(2) Turn the eyecup in the direction of the arrow. Then replace the screw.
1
Caution
Do not remove any other screws. You may remove only the screw to remove the eyecup.
Иíôîðìàöèя ïî óõîäó çà àïïàðàòîì è ïðåäîñòîðîæíîñòè
Уäàëåíèå ïûëè èç âèäîèñêàòåëя
(1) Сíèìèòå âèíò ñ ïîìîùüþ îòâåðòêè (íå ïðèëàãàåòñя). Зàòåì ñäâèãàя ðó÷êó RELEASE, ïîâåðíèòå îêóëяð â íàïðàëåíèè ñòðåëêè è âûòàùèòå åãî.
(2) О÷èñòèòå ïîâåðõíîñòü ñ ïîìîùüþ èìåþùåéñя â ïðîäàæå âîçäóõîäóâêè.
2
| Additional information / | |
íà êîðïóñå. | Дîïîëíèòåëüíàя | |
Дëя ïðèñîåäèíåíèя îêóëяðà |
| |
(1) Сîâìåñòèòå êàíàâêó íà îêóëяðå ñ ìåòêîé • | èíôîðìàöèя | |
(2) Пîâåðíèòå îêóëяð â íàïðàâëåíèè ñòðåëêè. | ||
| ||
Зàòåì óñòàíîâèòå íà ìåñòî âèíò. |
|
2
Пðåäîñòåðåæåíèå
Нå ñíèìàéòå íèêàêèõ äðóãèõ âèíòîâ. Вû ìîæåòå îòêðóòèòü òîëüêî âèíò äëя ñíяòèя îêóëяðà.
87
