be serviced before use. Lower Guard may operate sluggishly due to damaged parts, gummy deposits, or a
12.Lower Guard (A7) on the Circular Saw should be retracted manually only for special cuts such as ″plunge cuts″ and ″compound cuts.″ Raise Lower
Guard by retracting handle and as soon as blade enters the material, the Lower Guard must be released. For all other sawing, the Lower Guard should operate automatically.
13.Always observe that the Lower Guard (A7) on the Circular Saw is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk back- wards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.
14.The Circular Saw is designed for use only with a
15.To prevent serious injury from flying shrapnel, do not use any abrasive wheels on the circular saw. The saw and its guards are not designed to ac- commodate abrasive wheels.
Drill Safety Warnings
1.Hold power tools by insulated grip- ping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord.
Contact with a ″live″ wire will make ex- posed metal parts of the tool ″live″ and shock the operator.
Reciprocating Saw Safety Warnings
1.Hold power tool by insulated gripping surfaces when performing an opera- tion where cutting tool may contact hidden wiring or its own cord. Con- tact with a ″live″ wire will make exposed metal parts of the tool ″live″ and shock the operator.
2.Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
3.When using the Reciprocating Saw, do not cut material that is thicker than the Saw Blade is long. Allow for blade stroke.
SKU 66755 | For technical questions, please call | Page 7 |
