Set Up and Operating
Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
ciprocating Saw or the Circular Saw. Ensure you will not be cutting through any electrical wires, pipes, or your work- bench.
Tool Set Up
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and remove the Battery Pack (1)from the tool before performing any inspection, maintenance, or cleaning procedures.
Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Route the charger cord for the Charger/ Battery Socket assembly along a safe route to reach the charger location with- out creating a tripping hazard or expos- ing the cord to possible damage.
3.Secure loose workpieces using a vise or clamps (not included) to prevent move- ment while working.
4.Verify that there are no utility lines, for- eign objects or other hazardous objects nearby that will present a hazard while working.
5.Check to make sure there is enough space under and behind the workpiece for the Saw Blade when using the Re-
SKU 66755 | For technical questions, please call | Page 13 |
