influence of drugs, alcohol or medica- tion. A moment of inattention while op- erating power tools may result in serious personal injury.
b.Use safety equipment. Always wear eye protection. Safety equipment such as a )dust mask,
c. Prevent unintentional starting. Ensure the switch is in the
d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotat- ing part of the power tool may result in personal injury.
e.Do not overreach. Keep proper foot- ing and balance at all times. This enables better control of the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from mov- ing parts. Loose clothes, jewelry or long hair can be caught in moving parts.
g.If devices are provided for the con- nection of dust extraction and col- lection facilities, ensure these are connected and properly used. Use of these devices can reduce
h.Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be
must be
4.Power tool use and care
a.Do not force the power tool. Use the correct power tool for your applica- tion. The correct power tool will do the job better and safer at the rate for which it was designed.
b.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any ad- justments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of start- ing the power tool accidentally.
d.Store idle power tools out of the reach of children and do not allow per- sons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly main- tained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for
Page 4 | For technical questions, please call | SKU 66755 |
