MAINTENANCE AND
SERVICING
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION: Turn the Trigger off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or any cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.AFTER USE, wipe the tool with a clean cloth.
3.PERIODICALLY, and after each prolonged and extensive application, blow compressed air into the motor housing slots to remove any accumulated dirt and debris.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Page 12 | For technical questions, please call | SKU 68169 |
