3.To turn off the Flashlight, slide the Switch Button (4C) to its OFF position.

(See Figure E.)

4.To change the Bulb (7C), unscrew the Light Head Cap (9C) and remove the Lens (8C). Remove the old Bulb by pushing in on the Bulb while turning it clockwise. Insert a new Bulb by aligning the tabs on the Bulb with the slots in the Bulb socket. Push in on the new Bulb while turning it counterclockwise. Re-attach the Lens and Light Head Cap. (See Figure E.)

BATTERY (1A)

LIGHT

LENS

 

 

HEAD

(8C)

 

 

CAP

 

 

 

 

(9C)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SWITCH

BULB

 

 

(7C)

FLASHLIGHT

BUTTON

 

 

HANDLE

(4C)

 

 

 

 

 

 

 

FIGURE E

To Operate The Sander:

1.WARNING!

The Cordless Sander is not designed for wet sanding.

2.Make sure the Battery (1A) is disconnected from the Sander prior to attaching sand paper (not included) to the tool.

3.To attach sand paper to the Sander, use the hook and loop mechanism on its Sand Paper Pad (17D). (See Figure F, next page.)

4.Whenever possible, secure the workpiece that is to be sanded in a vise or with clamps.

5.Insert the fully charged Battery (1A) in the Sander’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure F.)

6.To turn on the Sander, squeeze the Switch (3D). NOTE: Always grip the Sander firmly with both hands when the tool is running.

SKU 90374

PAGE 12

Page 12
Image 12
Harbor Freight Tools 90374 operating instructions See Figure E, To Operate The Sander