Harbor Freight Tools 90374 operating instructions Symbology, Specific Safety Rules, REV 04f

SYMBOLOGY

	Double Insulated
	Canadian Standards
	Association
	Underwriters
	Laboratories, Inc.
V ~	Volts Alternating Current
A	Amperes
no xxxx/min.	No Load Revolutions
	per Minute (RPM)

SPECIFIC SAFETY RULES

1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Combo Pack in areas near flammable chemicals, dusts, and vapors.

2.Maintain labels and nameplates on the Combo Pack. These carry

important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

3.Ground this product. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, the Battery Charger (1B) should only be connected to a 120 volt electrical outlet that is protected by a Ground Fault Circuit Interrupter (GFCI).

4.When using a hand-held power tool, always maintain a firm grip on the tool with both hands.

5.To avoid electrical shock, do not pull or carry the Battery Charger/Charger Base (1B, 1C) by its Power Cord or pull the Power Cord around sharp corners or edges. Do not unplug the Battery Charger by pulling on the Power Cord. Keep the Power Cord away from heated surfaces.

6.Never leave the Battery Charger (1B) unattended when it is plugged into an electrical outlet. Make sure to unplug the Battery Charger from its outlet before leaving.

SKU 90374 PAGE 8 REV 04f