Manuals / Harbor Freight Tools / Household Appliance / Water Heater

Harbor Freight Tools 93762 Operating Instructions, To Use The Vise, See Figure H, See Figure K

Models: 93762

1 29

Download 29 pages 58.01 Kb

Page 14

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

CAUTION! Turn the Power Switch

(164)to its “OFF” position and un- plug the tool from its electrical outlet prior to making adjustments to the tool.

To Use The Vise:

1.Raise the Body Frame (60) to its vertical position, and lock the Body Frame in place with the Support Plate

(150)and Locking Pin (153).

(See Figure H.)

MOVEABLE VISE PLATE (141)

HAND

WHEEL

(171)

MACHINE BED (142)

4.Clamp the workpiece firmly with the

Moveable Vise Plate (141) by rotat- ing the Hand Wheel (171) clockwise.

(See Figure K.)

To Use The Quick Vise Adjustment For An Angle Cut:

Loosen the Hex Bolt (136), and move the Mitering Vise Plate (138) to the threaded hole position. Adjust the Mitering Vise Plate to the desired angle as indicated by the Angle Scale (165). Loosen the Hex Bolt (139), and adjust the Moveable Vise Plate

(141)to parallel the Mitering Vise Plate. Then, re-tighten the Hex Bolt.

(See Figure L.)

FIGURE K

2.Open the Moveable Vise Plate (141) to accept the piece of material to be cut by rotating the Hand Wheel (171) counterclockwise. (See Figure K.)

3.Place the workpiece on the Machine Bed (142). If the workpiece is long, support the end. (See Figure K.)

				THREADED
				HOLE POSITION				HEX BOLT
								HEX BOLT
						(136)
									MITERING



									VISE
									PLATE
MOVEABLE						(138)
						(138)



VISE	HEX BOLT
PLATE	HEX BOLT
PLATE	(139)
(141)	(139)
(141)			ANGLE SCALE			FIGURE L
			ANGLE SCALE
	(165)

SKU 93762

For technical questions, please call 1-800-444-3353.

Page 14

Image 14

Harbor Freight Tools 93762 Operating Instructions, To Use The Vise, See Figure H, See Figure K, See Figure L

Contents

Model Set up and Operating Instructionshorizontal/vertical metal cutting bandsaw Contents CAUTION, used with the safety Important SAFETY InformationSave This Manual CAUTION, without the safety alertLENGTH NAMEPLATEEXTENSION CORD 100’Manual Before Operating Saw Band Saw Safety WarningsFor Your Own Safety Read Instruction For technical questions, please call20.Use indoors only For technical questions, please callVibration Safety Save these instructionsGrounding Instructions To prevent electric shockOutlets for 2-ProngPlug Double Insulated Tools Toolswith Two Prong Plugs For technical questions, please callUNPACKING SPECIFICATIONSASSEMBLY INSTRUCTIONS To Assemble The StandFIGURE B To Attach The Stock Stop AssemblyTo Attach The Bandsaw To The Stand FIGURE CTo Attach The Pulley Cover To Install The V-BeltSee Figures E and F To Adjust The Cutting Speed 2. See Figure ETo Convert The Bandsaw For Vertical Use FIGURE GSee Figures E, F, and G FIGURE HBolt. See Figures I and J See FigureFIGURE J For technical questions, please callTo Use The Vise OPERATING INSTRUCTIONSTo Use The Quick Vise Adjustment For An Angle Cut See Figure HAdjusting The Blade Tracking To Adjust The Stock StopSee Figure M Adjusting The Blade Guide Bearings FIGURE MSee Figure P See Figure O Adjusting The Blade TensionSee Figure H FIGURE OFIGURE Q Adjusting The Feed RateAdjusting The Blade Guide Brackets See Figure QSee Figure S FIGURE SSee Figure S See Figure SSee Figure S See Figure SSee Figure S See Figure TSee Figure T For technical questions, please callSee Figure U INSPECTION, MAINTENANCE AND CLEANINGDo not use damaged equipment FIGURE USee Figure See Figure USee Figure U See Figure FSee Figure FIGURE WFigure W For technical questions, please callTROUBLESHOOTING For technical questions, please callREV 09f PARTS LISTFor technical questions, please call PARTS LIST CONT For technical questions, please callSKU 93762 For technical questions, please call PARTS LIST CONTPLEASE READ THE FOLLOWING CAREFULLY ASSEMBLY DIAGRAM For technical questions, please callLimited 1 year / 90 Day warranty For technical questions, please call