Harbor Freight Tools 93762 operating instructions Figure G, To Attach The Pulley Cover, Figure H

FIGURE G

HEX BOLT (149)

SOCKET HEAD SCREW (156) SHAFT (158)

STOCK STOP (157)

END VIEW

WITH

HAND WHEEL (171)

IN FOREGROUND

To Attach The Pulley Cover:

1.Position the Pulley Cover (72) over the Worm Shaft (9) and Motor Shaft (81). Align the mounting hole in the Pulley Cover with the mounting hole in the Body Frame (60). Then secure the Pulley Cover to the Bandsaw, using one Hex Bolt (76) and one Flat Washer (77). (See Figure H.)

			PULLEY COVER
		(72)
WORM SHAFT				MOTOR SHAFT
	HEX BOLT (76)	(81)
(9)
	FLAT WASHER (77)
BODY FRAME
(60)
				FIGURE H

To Attach The Spindle Pulley And Motor Pulley:

1.Slide the Spindle Pulley (1) fully onto the Worm Shaft (9). Then secure the Spindle Pulley to the Worm Shaft, using one Socket Head Screw (2).

(See Figure I, next page.

2.Insert the Shaft Key (80) in the slot on the Motor Shaft (81). Align the slot in the

SKU 93762 For technical questions, please call 1-800-444-3353. Page 13