Harbor Freight Tools 93762 Operating Instructions, Figure O, To Use The Vise, Figure P

Support (191) to the Vertical Cutting Plate (189), using one Flat Washer (192) and one Nut (193). Remove the Hex Head Bolt (61). Position the Vertical Cut- ting Plate Support against the Body Frame (60). Then firmly re-tighten the Hex Head Bolt. (See Figures N and O.)

SCREW (190)

VERTICAL

CUTTING PLATE

(189)

FLAT WASHER (192)

NUT (193)

VERTICAL CUTTING PLATE SUPPORT (191)

HEX HEAD BOLT (61)

FIGURE O

OPERATING INSTRUCTIONS

1. CAUTION! Always make sure the Power Switch (164) for the Bandsaw is in its “OFF” position and the tool is unplugged from its electrical outlet prior to making adjustments to the tool.

To Use The Vise:

1.Raise the Body Frame (60) to its vertical position, and lock the Body Frame in place with the Support Plate (150) and Locking Pin (153). (See Figure M.)

2.Open the Moveable Vise Plate (141) to accept the piece of material to be cut by rotating the Hand Wheel (171) counterclockwise. (See Figure P.)

3.Place the workpiece on the Machine Bed (142). If the workpiece is long, support the end. (See Figure P.)

4.Clamp the workpiece firmly with the Moveable Vise Plate (141) by rotating the Hand Wheel (171) clockwise. (See Figure P.)

MOVEABLE VISE PLATE (141)

HAND WHEEL	MACHINE BED (142)
(171)

FIGURE P

SKU 93762 For technical questions, please call 1-800-444-3353. Page 17