Harbor Freight Tools 93762 To Use The Quick Vise Adjustment For An Angle Cut, Figure Q, Figure R

To Use The Quick Vise Adjustment For An Angle Cut:

1.Loosen the Hex Bolt (136), and move the Mitering Vise Plate (138) to the threaded hole position. Adjust the Mitering Vise Plate to the desired angle as indicated by the Angle Scale (165). Loosen the Hex Bolt (139), and adjust the Moveable Vise Plate (141) to parallel the Mitering Vise Plate. Then, re-tighten the Hex Bolt. (See Figure Q.)

			THREADED
			HOLE POSITION		HEX BOLT
				(136)
						MITERING
						VISE
						PLATE
MOVEABLE				(138)
VISE	HEX BOLT
PLATE
	(139)
(141)		ANGLE SCALE		FIGURE Q
	(165)

To Adjust The Stock Stop:

1.Loosen the Socket Head Screw (156) that holds the Stock Stop (157) to the Shaft (158). (See Figure R.)

2.Adjust the Stock Stop (157) to the desired length position. Then, re-tighten the Socket Head Screw (156). (See Figure R.)

WORKPIECE

(NOT INCLUDED)

STOCK STOP (157)

SOCKET HEAD SCREW (156)

SHAFT (158) FIGURE R

SKU 93762 For technical questions, please call 1-800-444-3353. Page 18