Harbor Freight Tools 93762 To Install The V-Belt, See Figures I and J, Figure J

Motor Pulley (79) with the Shaft Key. Slide the Motor Pulley fully onto the Motor Shaft. Then secure the Motor Pulley to the Motor Shaft, using one Socket Head Screw (2). (See Figure I.)

V-BELT (10)

SPINDLE PULLEY (1)

FIGURE I

To Install The V-Belt:

SHAFT KEY (80)

(NOT SHOWN)

MOTOR PULLEY (79)

1.The V-Belt (10) can be installed by loosening the Hex Bolt (70) and moving the Motor (81) forward. Place the V-Belt around the top grooves in the Spindle Pulley (1) and Motor Pulley (79). Next, move the Motor backwards to tighten the tension on the V-Belt. Then, re-tighten the Hex Bolt to secure the Motor in place.

(See Figures I and J.)

HEX BOLT (70)

MOTOR (81)

FIGURE J

To Adjust The Cutting Speed:

1.The Bandsaw is designed to cut at three different speeds: 80, 120, and 200 FPM (Feet Per Minute) depending on the type of material being cut.

SKU 93762 For technical questions, please call 1-800-444-3353. Page 14