Harbor Freight Tools 98676 operating instructions Operating Instructions, Figure H

FIGURE H FIGURE I

ECCENTRIC

ROD

(25)

ANGULAR

SETTING

ASSY.

(45)

POWER SWITCH (71)

OPERATING INSTRUCTIONS

1.The Lathe features a yellow Safety Switch on the Power Switch (71) to prevent unauthorized use. To turn the Lathe on, plug the Power Cord (76) into the nearest 120 volt, ground- ed, electrical outlet.

2.Insert the Safety Switch into the Power Switch. Move the Power Switch to the “ON” position. To turn the Lathe off, move the Power Switch to the “OFF” position. To lock the Power Switch in the “OFF” position, remove the Safety Switch and store it in a safe location. (See Figure I.)

3.The Motor (13) of the Lathe must be running before you can use the Speed Control Lever (48-4).

4.The Speed Control Lever (48-4) can be turned to one of the ten fixed speeds (670, 840, 1040, 1230, 1480, 1650, 1770, 2100, 2420, 2900 RPM).

5.To set the speed, pull back on the Speed Control Lever (48-4) and ro- tate the Lever to the next fixed speed.

Use the Speed Label (49) to choose the desired Lathe speed.

6.Turn the Speed Control Lever (48-4) clockwise to increase the speed, and turn the Lever counterclockwise to decrease the speed.

7.You must move the Speed Control Lever (48-4) to the lowest speed set- ting before turning the Power Switch

(71)off. Otherwise, damage to the

Lathe may occur. (See Figures J and K.)

SKU 98676 For technical questions, please call 1-800-444-3353. Page 13