Harman-Kardon 640 Teletext, Learning codes from a remote, Transmitter Window on the DL remote

TV Functions Remote Control

Teletext

Teletext, also known as Videotext, is an informa- tion system broadcast by some TV-channels. It can be consulted like an interactive newspaper for the latest news, sports and entertainment. Harman Kardon Digital Lounge teletext also offers access to subtitles for hearing impaired viewers. Colored buttons on the remote control give direct access to various pages, depending on the TV-channel.

To activate the teletext function, press the Teletext Button B on the remote control. A first press will display the teletext instead of the TV channel you were watching. A second press will show both the TV channel you were watch- ing to and the teletext next to each other. Pressing the Teletext Button B again will de-activate the teletext function. It is also possi- ble to have the teletext page shown with the TV image in the background. In order to do so, press the Mix Button D when Teletext has been activated.

The first page of the teletext that will be dis- played is always page 100, an index page used by all channels. Other pages can be searched for by pressing the page number on the top of the screen with the help of the Numeric Keys

of the remote control. At all times, the index page can be re-called by pressing the PG 100 Button .

Once you have teletext on your screen, you will see that there are 4 colored squares on the bot- tom of the screen, each with a specific teletext page number in it. These colored buttons corre- spond to the colored buttons 4NO

on the remote control. Pressing the correspon- ding colored button on the remote control will select the page highlighted in the square. Note that the shown pages are dynamic, and change with each button press.

Some teletext pages contain additional sub pages. These sub pages can be selected directly

by pressing the SUB PG Button on the remote control. Each button press will increment the sub page number to enable direct selection of the sub pages.

Note that as long as Teletext is activated no other source can be selected on the screen.

Learning codes from a remote

The Digital Lounge remote is able to “learn” codes from other remote controls that might be part of your system setup, like the one from your TV. To learn or transfer codes from an IR remote to the DL’s remote, follow these steps:

1.Place the front of the original remote with the code being sent so that it is facing the IR

Transmitter Window on the DL remote

“head-to-head.”The remotes should be between 2 and 4cm apart.

2.Select the button on the remote that you wish to use as the device selector for the codes about to be entered. You can use the buttons VIDEO, PC and HDMI 1-2-3 0. The buttons TV, DVD and the six Audio On buttons Kcannot be used for pro- gramming.

3.Press the Learn button P and the Device Selector Button 0 selected in step 2 – keep them pressed until the device button light remains on. Release the buttons. It is important that you begin the next step within 25 seconds.

4.Press the button on the DL remote that you wish to program. Note that the Device button flashes once. To learn a command into the VIDEO, PC, HDMI1-2-3 buttons 0, press these buttons for three seconds.

Important Note: Codes cannot be taught to all buttons on the remote. In these cases the button light flashes rapidly several times to indicate that this particular button cannot be programmed

5.As long as the Device button is on steadily (for five seconds), briefly press the button on the origi- nal remote that you wish to “teach” into the DL remote. If you pressed the button too late or no command was received within five seconds, the Device button flashes rapidly several times, then simply repeat step four. When the Device button flashes 4 times, the learning process has been suc- cessful for the chosen button.

NOTE: If the Device button remains red without flashing 4 times during Step 5, the programming was not successful. Repeat the steps to see if the code will “take.”If the indicator remains red in step 5, this code cannot be taught.

6.Repeat steps 4 though 5 for each button on the source remote that you wish to transfer to the DL remote.

7.Once all codes have been transferred from the original source remote to the DL remote, press the Learn button P. This will make the Device button flash 3 times to indicate that you have completed the Learn procedure, and turn off the learning mode. You may also wait 20 seconds, after which the remote exits learn mode auto- matically.

8.Repeat Steps 1 through 7 for any additional remotes you wish to “teach” into the DL Remote.

44REMOTE CONTROL